Anodized Metal Bowl
$3.25
Anodized Metal Bowl
Screw-on Anodized Metal Bowl. Use these to build your own pipes or change out the bowl on your existing pipe.
Anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.
The process is called anodizing because the part to be treated forms the anode electrode of an electrolytic cell. Anodizing increases resistance to corrosion and wear and provides better adhesion for paint primers and glues than bare metal does. Anodic films can also be used for several cosmetic effects, either with thick, porous coatings that can absorb dyes or with thin transparent coatings that add reflected light wave interference effects.
3/4″ x 3/4″
Choose from:
- Black
- Blue
- Green
- Grey
- Pink
- Purple
- Red
Click here to order Anodized Metal Pipe Stems
Click here to order Anodized Metal Pipe Caps
Anodized Metal Bowl
Screw-on Anodized Metal Bowl. Use these to build your own pipes or change out the bowl on your existing pipe.
Anodizing is an electrolytic passivation process used to increase the thickness of the natural oxide layer on the surface of metal parts.
The process is called anodizing because the part to be treated forms the anode electrode of an electrolytic cell. Anodizing increases resistance to corrosion and wear and provides better adhesion for paint primers and glues than bare metal does. Anodic films can also be used for several cosmetic effects, either with thick, porous coatings that can absorb dyes or with thin transparent coatings that add reflected light wave interference effects.
3/4″ x 3/4″
Choose from:
- Black
- Blue
- Green
- Grey
- Pink
- Purple
- Red
Click here to order Anodized Metal Pipe Stems
Click here to order Anodized Metal Pipe Caps
Related products
Pipe Screens – 5 Pack
Package of 5 Sturdy Screens for any pipe - choice of two sizes, three materials. Mr. Bill's only carries the strongest screens around!
.625 are about the size of a dime
.750 are about the size of a nickel
Choose from:
- Brass
- Steel, Coarse
- Steel, Fine
Click here for Packs of 100 for $12.99
Metal Pipe Cap
These Metal Pipe Caps fit all standard pipe bowls. Using a Metal Pipe Cap preserves your smoking material (it will go out when not smoking) and cut down on the smoke coming out of your pipe. And, if you are smoking outside, in the wind, your pipe will stay lit longer!
Choose from:
- Brass
- Silver
Click here to order a Metal Bowl
Click here to order an Aluminum Pipe Stem
Anodized Pipe Stem
Inner threaded Anodized Pipe Stem. Stem length is measured the entire length of the stem including the wellspring (the opening where the bowl fits into).
Four Length Sizes:
- 2 1/2''
- 3 1/2"
- 4 1/2"
- 5 1/2"
Choose from:
- Black
- Blue
- Green
- Grey
- Purple
- Red
Click here to order Anodized Metal Bowls
Click here to order Anodized Metal Caps
Click here to order Grommets
Butterfly Clip
Water Pipe Part - A Metal Lift-Out Handle called a Butterfly Clip. This is a nice little helper tool for your water pipe bowl! This will save you many burnt fingers and to me is a pretty useful feature especially if you are in a rush and can't really sit around waiting for the tube to cool down each time you need to smoke!
2" wide
Acorn Elbow
This Acorn Elbow is a component of a metal smoking pipe that allows for the redirection of airflow within the pipe. It has two openings at different angles, allowing for the connection of two separate pipe sections. This design helps in creating a more ergonomic and customizable smoking experience. You can also choose a Two-Way Elbow.
Size: 3/4" High, Top opening is 1/2", side opening is 3/8". All of our bowls will fit these parts.
Choose from:
- Acorn Elbow
- Two Way Elbow - Brass
- Two Way Elbow - Nickel